Home
Products and SolutionsCORE EQUIPMENTDouble Sided Lapping Polishing MachineDouble-Sided Lapping/Polishing Machine YJ-15B7LE/PE
DOUBLE SIDED LAPPING/POLISHING MACHINE
YJ-15B7LE/PE
Introduce
DOUBLE SIDED LAPPING/POLISHING MACHINE YJ-15B7LE/PE
The machine is used for precision plane grinding / polishing of electronic and optical materials such as optical glass, window glass, ceramics, sapphires, etc., as well as parts made of ultra-thin and brittle materials, such as valve plates, valve plates, riaid aaskets, piston rinas, auartz crvstals. alass, preciousstones,other metals,non-metals, etc.
Peculiarity
-
01
Driven by 3 motors, the upper plate and the solar wheel are driven by a separate motor, and the lower disk and the inner gear ring are driven by the same motor.
-
02
Increase the positioning pin for the sun drive gear, whoes number of teeth is the same as that of the sun gear, which is convenient for accurate positioning and provides conditions for automatic production.
-
03
The upper plate is equipped with pressure sensor to monitor the upper plate pressure.
-
04
The upper plate device is equipped with a safety device, which will not drop due to sudden failure in the state of placement, maintenance, etc., thus increasing the safety.
-
05
By using the automatic lubrication device, the bearings and gear meshing parts of the machine can be fully lubricated, which greatly improves the service life of the whole machine.
-
06
The outlet of the equipment is equipped with water-liquid conversion device, which can automatically separate cleaning water and grinding liquid through program control, and the operation is convenient.
Argument
-
Upper/Lower plate sizeΦ1091(±0.5)×φ510×40 mm
-
Thickness of workpiece最大(Max):20 mm
-
Dimensions of workpiece最大(Max):φ280 mm
-
Upper、lower plate rotational speed0-60 rpm(上盤減速機需更換)
-
Lifting stroke ofinner gear ring0-25 mm
-
Power supply/Power consumption3相(phase)-380V／19 KVA
-
Air supply/Air consumption0.45~0.65 Mpa／(9.5xN)L/H(N為每小時工作循環次數)
-
Size L×W×H2200×1560×3100 mm
-
Weight)~3760 Kg
-
Upper plate flatness≤0.08 mm
-
Parallelism of upper and lower plates上盤帶自適應萬向結構
-
Lower plate jumps≤0.08 mm
-
Upper、lower plate rotational speed≤0.08 mm
WeChat public account
More social media accounts：